🌟 Are you ready to revolutionize your living space with the ultimate wall-mounted light fixture that sticks like a dream?
💡 Say goodbye to power tools with Poplight, the stylish wall sconce that uses the magic of 3M tape for the ultimate renter friendly upgrade. In just a few simple steps, you’ll be lighting up your life—literally.
But first, let’s talk about our bff 3M tape. This isn’t just any ordinary tape. This is the tape of 🏆 champions 🏆, the tape that dreams are made of. It’s strong, reliable, and, most importantly, removes without leaving a mark, AND it saves you from the tyranny of tools. So, let’s get sticking!
If you've been traumatized in the past by failed 3M tape, read this closely to get our best pro tips for the perfect Poplight install!
Step 1: Find Your Perfect Spot
Before you start, take a moment to channel your inner interior designer. Where will your new light fixture shine the brightest? Above your bed for some cozy reading light? Next to your desk for that Zoom call glow-up? Or maybe in the hallway to guide those late-night snack missions? Choose your spot, and make sure the surface is smooth, clean, and dry.
😅 But don't stress it. With the magic of double sided sticky tape, Poplight can be reinstalled endlessly, so if you don't like where you hang your Poplight the first time, you can easily remove it and reinstall your Poplight again. All you need is another pair of sticky tape!
Step 2: Clean the Surface (Seriously, Do It)
We know, we know—cleaning isn’t glamorous. But trust us on this one. Your wall sconce’s future depends on it. Grab a cloth and some isopropyl alcohol. Give the wall a good wipe-down to remove any dust, dirt, or mysterious smudges. Let it dry completely. If you skip this step, your 3M tape might give up on you, and nobody wants that kind of heartbreak.
Step 3: Get Ready to install your Poplight base
Time for Poplight! Remove the base from your Poplight. (See our full Poplight install instructions here!) Peel off the backing from the 3M tape, but don’t touch the sticky part. This isn’t a stick-and-pray situation. You need that tape to be at its stickiest best.
Step 4: Stick It Like You Mean It
Here comes the fun part! Use the built in level on Poplight's base to get your Poplight perfect in your the chosen spot! Press down really, really well to get that perfect stick. Apply even pressure for at least 20 seconds, and make sure every inch of that tape is making contact with the wall. Think of it as giving your sconce a big, supportive hug. 🤗
Step 5: Patience, Young Grasshopper
You’re almost there, but resist the urge to swivel on your Poplight, especially if you've had trouble with sticky tape in the past. If you want THE BEST connection possible, give your Poplight base between 1 hour and a full day to completely set on the wall. This is crucial for maximum stickiness. Use this time to step back and admire your handiwork.
Step 6: Light It Up!
The wait is over! Swivel Poplight onto the base and get ready for the ultimate ambiance addition. You did it! No drills, no mess, no stress. Just pure, unadulterated light.
Bonus Tips for the Ultra-Sticky
- Temperature Matters: Stick your sconce in a room that’s above 50°F (10°C). Cold temps can mess with the adhesive power.
- Removal: When it’s time to move or redecorate, gently pull the tab of the 3M tape downwards, not outwards, to avoid damaging your wall. See how to do it here!
And there you have it, folks! A brilliantly easy, fun, and stylish way to light up your space. So, what are you waiting for? Go forth and stick with confidence. Your walls—and your future self—will thank you. 🌟✨